[PCB_FORUM] Re: XY Coordination for Pastmask (Machine Soldering/Assembly) from Allegro

From: Ron Mora <rmora@xxxxxxxxxxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Fri, 17 Aug 2007 07:27:17 -0700

Yes I do, but will need more information.
With Allegro you can output through extract any part centroid x and y location.
Then you just format it to the assembly  tool you are using.

Ron Mora

At 01:21 PM 8/17/2007 +0800, you wrote:

Dear All,
Does anyone knows how to create an X-Y coordination file for paste-mask(component assembly pad locations)? Please help!
Regards,

Judy Huang

References:

[PCB_FORUM] Re: component move
From: lthemanz

[PCB_FORUM] XY Coordination for Pastmask (Machine Soldering/Assembly) from Allegro
From: Judy Huang

Other related posts:

» [PCB_FORUM] XY Coordination for Pastmask (Machine Soldering/Assembly) from Allegro
» [PCB_FORUM] Re: XY Coordination for Pastmask (Machine Soldering/Assembly) from Allegro
» [PCB_FORUM] Re: XY Coordination for Pastmask (Machine Soldering/Assembly) from Allegro
» [PCB_FORUM] Re: XY Coordination for Pastmask (Machine Soldering/Assembly) from Allegro

Browse icu-pcb-forum