[PCB_FORUM] Re: XY Coordination for Pastmask (MachineSoldering/Assembly) from Allegro

Hi

File  >  Export  >  Placement.

In this tab u can have three options as Symbol origin, Body centre, Pin 1.

You can select Pin 1 and click export.

It will generate a *.txt file which contains all the Component locations.

Hope this helps.

Best Regards

Ponraj.M





> Hi all,
> I tried to use the following instruction but I got an error message as
> "\plctxt.log' does not exit" so no file actually created.
> Can somebody help me with this issue?
> Thanks,
> Tse Yu Lan
>
> On 8/17/07, Peter Pietrangelo <peter_pietrangelo@xxxxxxxxxxxxx> wrote:
>>
>>  File ---- Export ----- placement
>>
>>
>>  ------------------------------
>>
>> *From:* icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:
>> icu-pcb-forum-bounce@xxxxxxxxxxxxx] *On Behalf Of *Judy Huang
>> *Sent:* Thursday, August 16, 2007 10:22 PM
>> *To:* icu-pcb-forum@xxxxxxxxxxxxx
>> *Subject:* [PCB_FORUM] XY Coordination for Pastmask (Machine
>> Soldering/Assembly) from Allegro
>>
>>
>>
>> *Dear All,*
>>
>> * *
>>
>> *Does anyone knows how to create an X-Y coordination file for paste-mask
>> (component assembly pad locations)?  Please help!*
>>
>> * *
>>
>> *Regards,*
>>
>> *Judy Huang*
>>
>
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: