Hi Satish,
Cheers, Dave
k.satish@xxxxxxxxx wrote:
Hi Mike,
Thanks for the information.
I am new to this CAD Tool, can you tell me UniCAD "PCB Layout" is it same as UniCAD "Physical Design"?
I contacted Local Cadence Support team for the UniCAD Documents/ Materials to startup, they couldn't get anything till now as it is no longer supported & told to get back soon.
UniCAD Software (Unix) was installed by our Local Cadence Support team sometime back.
I was going through "Unihelp", it is too big. I have to start immediately, so if you can provide the materials it will be very useful.
Rd,
K. Satish
-----Original Message----- *From:* Mike Finczak [mailto:mike@xxxxxxxxxxxxx] *Sent**:* Friday, September 03, 2004 7:25 PM *To:* icu-pcb-forum@xxxxxxxxxxxxx *Subject:* [PCB_FORUM] Re: UniCAD Manual/ Documents.
Satish,
I have a hard copy of the "UniCAD Physical Design" course notes,
however the material is copyrighted, and still owned by Cadence.
Try using the help key (F1) and reading through the help menus,
that should give you most of what your looking for. If not, see if
Cadence is willing to send you soft copies of the course material.
Once you get used to the interface, you find that UniCAD is user
friendly and intuitive (what you see on screen is what you get).
I've also attached two keyboard overlays, one designed for HP
UNIX keyboards and one for PC style keyboards. You'll find that
zooming and panning are best accomplished through the function
keys.
Regards,
Mike Finczak
CopperCAD Design
www.CopperCAD.com
905-488-8958
-----Original Message----- *From:* k.satish@xxxxxxxxx [mailto:k.satish@xxxxxxxxx] *Sent:* September 3, 2004 1:48 AM *To:* icu-pcb-forum@xxxxxxxxxxxxx *Subject:* [PCB_FORUM] UniCAD Manual/ Documents. *Importance:* High
Hi,
I am looking for UniCAD Ver 8 (Unix) Tutorials. If any one can send me Manual or some material on the same in English will be very helpful.
Thanks in advance.
Rd,
K. Satish
(k.satish@xxxxxxxxx)
Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin@xxxxxxxxx immediately and destroy all copies of this message and any attachments.
Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin@xxxxxxxxx immediately and destroy all copies of this message and any attachments.
begin:vcard fn:Dave Elder n:Elder;Dave org:Tait Electronics adr:;;PO Box 1645;Christchurch;;;New Zealand email;internet:dave.elder@xxxxxxxxxx title:PCB Design Manager tel;work:+64 3 3580327 tel;cell:+64 21 37 37 25 url:http://www.taitworld.com version:2.1 end:vcard