In Allegro: File > Change Editor... Select what version you want to use in the window that pops up, check the "Use as default" box, click "OK" -- George Patrick Tektronix, Inc. Central Engineering, PCB Design Group P.O. Box 500, M/S 39-512 Beaverton, OR 97077-0001 Phone: 503-627-5272 Fax: 503-627-5587 <http://www.tektronix.com/> http://www.tektronix.com <http://www.pcb-designer.com/> http://www.pcb-designer.com It's my opinion, not Tektronix' -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello Sent: Friday, May 06, 2005 08:53 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Setting Deault Editor Good morning fellow designers ... I am wondering if one of you can help me with something of an annoyance ..... we use Allegro Project Manager to navigate between projects and we presently have two flavours of the Allegro Editor - Allegro PCB Design 220 and Allegro PCB Performance 220 (a higher package). My problem is this ... every time I use the Project Manager and click on Layout to get at my PCB design, Allegro (by default) uses the lower end tool - Allegro PCB Design 220. Question - how (or what) can I change so that the higher end editor (Allegro PCB Performance 220) gets used instead. Thanks in advance for all your much appreciated help. Vincent Di Lello, CID+ Senior CAD Designer Kaleidescape Canada, Inc. vdilello@xxxxxxxxxxxxxxxx <mailto:vdilello@xxxxxxxxxxxxxxxx> (v) 519.772.6418 (f) 519.772.6401 (c) 519.835.4477 www.kaleidescape.com <http://www.kaleidescape.com>