[PCB_FORUM] Re: Scripts with Free Viewer
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 9 Jul 2010 10:13:43 -0400
Hey Dharma,
You are right, you cannot set the grids in the free viewer using Setup
-> Grids, so it makes sense that my script doesn't run. I was hoping
that there was some way to be able to set them. I'll keep trying though.
Thanks for your reply.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma
Kemp-Bresett
Sent: Friday, July 09, 2010 8:08 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Scripts with Free Viewer
I always thought the grid settings weren't accessible from the free
viewer.....? I always had to set up the grids BEFORE I sent a board to a
person using only the free viewer but I haven't really used the free
viewer much since 16.x so I am just guessing... hope this helps, at
least a little bit :-)
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents
contain information that is confidential, privileged or exempt from
disclosure under applicable law and is intended for the exclusive use of
the addressee. This information is private and protected by law. If you
are not the intended recipient, or have received this email in error,
you are hereby notified that any disclosure, copying, distribution or
use of the contents of this document in any manner is strictly
prohibited.
________________________________
From: Macindoe, Gary [mailto:Gary.Macindoe@xxxxxxxxxxxx]
Sent: Thursday, July 08, 2010 6:01 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Scripts with Free Viewer
Hey guys,
My scripts for different views (layers on/off), setting pads
filled/unfilled etc. are working fine in the Free Viewer. But, my
scripts for changing the grid cause the Free Viewer to crash.
Anyone know how to get grid setting scripts to work with the Free
Viewer?
TIA!
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R & D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
Other related posts:
