[PCB_FORUM] Re: SPB 15.2: Undo/Redo
- From: "Gary MacIndoe" <gary.macindoe@xxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 3 Dec 2004 14:21:38 -0700
Guys,
Thanks for the replies. My tools support guy figured it out, thanks Mike
Niyompong! I have a custom menu file, which Allegro was loading as I
intended. I forgot that with a new release, I have to append the latest
menu file with my custom setup.
I like the new Undo/Redo, and I'm glad that oops is still there (I'm
supprised that my F3 (oops) key hasn't broken by now!).
Thanks again, y'all!
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Friday, December 03, 2004 1:41 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB 15.2: Undo/Redo
Thanks Andy.
Hey guys, I just loaded the one from today (s039), and the Undo/Redo
buttons are still grayed out!!
How about that oops function, is it still supposed to be available?!? I
still have it as a RMB option (and assigned to F3).
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: Andy_Kulik@xxxxxxx [mailto:Andy_Kulik@xxxxxxx]
Sent: Friday, December 03, 2004 12:41 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB 15.2: Undo/Redo
I recommend to load the latest ISR (came out today). There was one that
was no good.
Latest Allegro version is s039 (51AW)
george.h.patrick@xxxxxxxxxxxxxx
Sent by:
12/03/2004 02:12 PM Please respond to
icu-pcb-forum@xxxxxxxxxxxxx
To icu-pcb-forum@xxxxxxxxxxxxx
cc
Subject [PCB_FORUM] Re: SPB 15.2: Undo/Redo
I haven't heard of anyone here crashing, but we just came up on it
yesterday.
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587
http://www.tektronix.com http://www.pcb-designer.com
It's my opinion, not Tektronix'
-----Original Message-----
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Friday, December 03, 2004 10:52
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB 15.2: Undo/Redo
Greg,
Thanks for the reply. This "s036" ISR is the same one George from
Tektronix said he was on. He didn't mention that he was crashing
frequently. Now I'm not sure if I should go to "s036" or not!
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: Greg Casagrande [mailto:GCasagrande@xxxxxxxxxx]
Sent: Friday, December 03, 2004 11:41 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB 15.2: Undo/Redo
Gary,
I ran into this same issue. It involves using ?axlTriggerSet?, the
interesting thing is Cadence fixed the issue with the last ISR. I loaded
that ISR, I think it was S036 the Undo /Redo were working but my Allegro
system kept crashing every one to two minutes. It kept creating database
errors, and I tried this on two different machines same results. I have
heard others in my company were seeing the same problems. So I?m waiting
for another ISR.
Greg Casagrande
NVIDIA
Chandler, AZ
----------------------------------------------------------------------------
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Friday, December 03, 2004 11:14 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB 15.2: Undo/Redo
George,
I'm on 15.2 s033 (v15-2-51AP) (11/2/2004) i86. It also says "Allegro
Expert (legacy)" in the About window.
Yes, I figured that I had to do something in order to Undo: I did some
routing, they are still grayed out.
With the new Undo/Redo, are you still supposed to have the good old
"oops" function as a RMB choice? (I have it assigned to a function key, F3).
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: george.h.patrick@xxxxxxxxxxxxxx
[mailto:george.h.patrick@xxxxxxxxxxxxxx]
Sent: Friday, December 03, 2004 10:55 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB 15.2: Undo/Redo
We are on 15.2 s036 (v15-2-51AT), I am not seeing that problem. What
version are you on?
FWIW, they are grayed out until you've done something to undo/redo :)
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587
http://www.tektronix.com http://www.pcb-designer.com
It's my opinion, not Tektronix'
-----Original Message-----
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Friday, December 03, 2004 09:36
To: Allegro Forum
Subject: [PCB_FORUM] SPB 15.2: Undo/Redo
Hey guys,
I just loaded Allegro SPB 15.2 with the latest ISR on W2K.
The Undo/Redo icons in the toolbar are grayed out. Anyone know what's
going on with this?
Thanks for any responses.
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
Other related posts:
