[PCB_FORUM] Re: Routing
- From: "Andrew Noonan" <andrew@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 16 May 2005 15:03:25 -0700
Garrett,
It sounds like in the Options tab, you have the 'Line Lock' set at 90.
Try changing to 45, or if you really want smooth, change line to arc.
Andrew
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Garrett
Gilbertson
Sent: Monday, May 16, 2005 3:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Routing
I cannot remember how to change my route to something smooth. My
current traces are like rectangles. Can someone help me out?
Garrett Gilbertson
Other related posts:
