[PCB_FORUM] Re: Refreshing Dynamic shapes
- From: "Dickoff, Diane J" <diane.j.dickoff@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 29 Apr 2005 09:51:58 -0700
George---
I don't know a solution but I have also seen the problem you are
having. I don't like it changing to disabled either......Diane.
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Friday, April 29, 2005 9:00 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Refreshing Dynamic shapes
Y'all:
I have a large board (15" square) with a bunch of dynamic shapes on it
(~400). This board has disabled the shape regeneration about three
times without asking, usually after doing a lot of line slides and such
inside one or another of the shapes or replacing/refreshing modules. I
can't find any reproducible reason for this happening so I can't report
it as a bug thru official channels to Cadence.
The biggest problem is that it is a BIG time hit waiting for all the
shapes to regenerate after changing from disabled back to rough or
smooth. Has anyone found a way to reenable the dynamic shapes without
immediately regenerating them? Or maybe being able to regenerate in
batch mode? I wouldn't mind having to pick up and re place a shape in
the area I am working on, just SOMETHING to not have to sit for an hour
or two watching the stop light go from red to yellow and back again :)
TIA!
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587
http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/>
It's my opinion, not Tektronix'
Other related posts:
