I found it. Here is the command: auto pr A LOCATION J1 where: A - is a group name LOCATION - name of a property to change/set J1 - property value Thanks for listening :) Gennadiy Kiryukhin wrote:
Hi group, Does anybody know of an easy way to set a property to the same value in a group of symbols. I have a bunch of symbols that need to have a property assigned to the same value. It is actually a split connector with a bunch of pins created as individual symbol that need to be assigned the same LOCATION value. I cannot use a Global Property Change because there are several connectors in my design. Regards, Gennadiy -----------------------------------------------------------To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxxwith a subject of subscribe or unsubscribeTo view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------
-- Gennadiy Kiryukhin Development Engineer ATSI 8157 US Route 50 Athens, OH 45701 Phone: (740) 592-2874 Fax (740) 594-2875 -----------------------------------------------------------To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------