[PCB_FORUM] Pausing on commands, anyone else?
- From: "Watts III, Nolan" <nolan.watts.iii@xxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 02 Nov 2005 09:23:54 -0600
I'm seeing fairly consistent behavior out of the Allegro GUI by it
pausing on certain commands, most repeatable is the Display/Color. The
first time you invoke this it takes around 7 seconds for it to appear.
Subsequent picks of it brings it up immediately, but NOT if some
considerable time has passed, say 30 minutes. It is as if there is some
sort of caching going on in the UI. I've seen this in both 15.2 and
15.5 and I'm running on high performance Precision 370 and 670 Dell's
with lots of memory(>2Gb), so one might assume hardware isn't the
limiting factor. I'm wondering if this is common performance for other
users. If so, please reply. Otherwise, I'll submit a SR to Cadence.
Thanks for your help,
Nolan Watts
Other related posts:
