Hi Gene, Thanks, but I solved this issue a while ago, and posted the solution: I was able to solve the ConceptHDL PDF printout problem we were having. The PDF file had the right and bottom side clipped. We are printing a D size page on a C size sheet...so it gets shrunk to fit...and what appeared to me to be happening, is it was fitting it to page first, as in, overlaying the D size on the C size, and clipping the graphics as described, then resizing it to fit the page. So, instead, I tried reducing in the Acrobat print driver, using %75, and it works perfectly now. If anyone isn't able to follow me here, I can try to give a better explanation. We are using the latest ISR on 15.2 with Acrobat 6.02. Regards, Austin > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gene Norris > Sent: Wednesday, June 08, 2005 9:44 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: Not able to print pdf's > > > -Get the Adobe printer driver and the PPD files for an appropriate > _postscript_ printer (note: most printers will do, but affect paper size > and margins). Both driver and PPD file are available on Adobe's web site. > > http://www.adobe.com/support/downloads/detail.jsp?ftpID=1500 > http://www.adobe.com/products/printerdrivers/winppd.html > > -Then install the driver, DO NOT use the default generic postscript > printer (ppd) NOR the distiller driver ppd NOR any "ADOBE" printer ppd. > INSTEAD use the ppd files downloaded above (like for Lexmark or HP). > Select "file" as port for printer. > > -Now, use this printer from Concept and print to c:\concept_ckt.ps (or > something). > > -Distiller can change this file to pdf with no problems. Further, the > print preview will accurately show your schematic. > > > Austin Franklin wrote: > > Interesting. We are having the same problem... Are you using Acrobat > > writer, V6 (with updates)? > > > > Regards, > > > > Austin > > > > > > -----Original Message----- > > *From:* Garrett Gilbertson [mailto:Garrett.Gilbertson@xxxxxxx] > > *Sent:* Monday, March 14, 2005 1:07 PM > > *To:* icu-pcb-forum@xxxxxxxxxxxxx > > *Subject:* [PCB_FORUM] Not able to print pdf's > > > > > > 15.2 > > Windows. > > I cannot print out pdf's from Concept. Has anyone run into this > > before? > > > > > > Garrett Gilbertson > > /Phoenix Design Center/ > > -- > Gene Norris > Engineering Manager > > Athens Technical Specialists, Inc. > 8157 U.S. Route 50 > Athens, Ohio > 45701-9303 > > 740.592.2874 > FAX.594.2875 > > http://www.atsi-tester.com/ > > visit ATSI's on-line shop: > http://www.atsi-tester.com/shop/ > > ----------------------------------------------------------- > To subscribe/unsubscribe: > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx > with a subject of subscribe or unsubscribe > > To view the archives of this list please login at > //www.freelists.org. Our list name is icu-pcb-forum > or go to //www.freelists.org/archives/icu-pcb-forum/ > > Problems or Questions: > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx > > Want to post a job listing ? DON'T DO IT HERE! > Better yet, join our jobs listing forum. > > SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx > POST: icu-jobs-forum@xxxxxxxxxx > ----------------------------------------------------------- > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------