[PCB_FORUM] No DRC, line to NPTH
- From: Jim Goshorn <jgoshorn@xxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Thu, 07 Apr 2005 14:56:20 -0500
I am beginning to see traces to NPTH that are not being flagged as DRC's
until the
trace violates the setting for line to pad.
As we have designed most of our NPTH padstacks, pad size well under the
drill hole size
we have found only through a visual inspection that we are encroaching the
drilled area.
Is there a parameter that needs to be set that I have over looked ?
Thanks Jim
Jim Goshorn
MCL, Inc
501 S Woodcreek Rd
Bolingbrook, IL 60440
630-771-7205
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
- » [PCB_FORUM] No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH
- » [PCB_FORUM] Re: No DRC, line to NPTH