[PCB_FORUM] Re: IDF import to PROE

From: dalocke2@xxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Thu, 28 Sep 2006 02:45:33 +0000

Make sure the board outline is one continous line.  ProE will not work if it is 
in segments.



 -------------- Original message ----------------------
From: "Eileen Ong" <eileen.ong@xxxxxxxxxxxxxx>
> Hi all,
> 
>  
> 
> I have generated a IDF file for PROE to import to check on the placement.
> Problem is the mechanical is able to import the emn/emp files for IDF
> generated from one of the BRD file but on another BRD file.The mechanical
> can't open the emn/emp files. It always prompt  them to correct part
> geometry with Sketcher. Any one got any clue how to resolve this?
> 
>  
> 
> 
> 
>  
> 
> Thanks in advance for help.
> 
> Best regards,
> Eileen 
>

--- Begin Message ---

From: "Eileen Ong" <eileen.ong@xxxxxxxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Thu, 28 Sep 2006 01:57:33 +0000

Hi all,

 

I have generated a IDF file for PROE to import to check on the placement.
Problem is the mechanical is able to import the emn/emp files for IDF
generated from one of the BRD file but on another BRD file.The mechanical
can't open the emn/emp files. It always prompt  them to correct part
geometry with Sketcher. Any one got any clue how to resolve this?

 



 

Thanks in advance for help.

Best regards,
Eileen

--- End Message ---

Follow-Ups:

[PCB_FORUM] Re: IDF import to PROE
From: Eileen Ong

[PCB_FORUM] Re: IDF import to PROE

Other related posts: