[PCB_FORUM] Re: How to Import Board Station into Allegro
- From: "Mike Wilson" <michael.w.wilson@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 11 Jan 2007 15:02:08 -0500
MidwestCAD has a service that does this all the time. Greata bunch of people.
Call Jim Saltouros at (847) 397-0220
----- Original Message -----
From: Deac Descoteaux
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Thursday, January 11, 2007 2:35 PM
Subject: [PCB_FORUM] Re: How to Import Board Station into Allegro
Sorry, BS cannot export a file that Allegro can import....
Deac
Deac Descoteaux
PalPilot, East Coast Corporation, (PEC)
Director of New Business Development
71 Spitbrook Road, Suite #307
Nashua, NH 03060
office # (603) 888-3400, ext. #10
Toll Free # (877) PALPILOT, (725-7456)
Fax # (603) 888-3500
Cell Phone# (603) 557-7568
email address: deacd@xxxxxxxxxxxx
www.palpilot.com
PCB LAYOUT * SIGNAL INTEGRITY * PCB FABRICATION * METAL CHASSIS * PLASTIC
MOLD INJECTION * BACKPLANE SOLUTION * CONNECTORS
The information contained in this communication including any attachments is
intended solely for the use of the individual or entity to whom it is addressed
and others authorized to receive it. This communication may contain information
that is privileged, confidential and exempt from disclosure under applicable
law. If you are not the intended recipient you are hereby notified that any
disclosure, copying, distribution or taking any action in reliance on the
contents of this information is strictly prohibited and may be unlawful. If you
have received this communication in error, please notify us immediately by
responding to this email and then delete it from your system. No printed copies
should be made or retained. Thank you.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mirza, Sam
Sent: Thursday, January 11, 2007 2:22 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] How to Import Board Station into Allegro
Folks,
Does anyone know how to import mentor BS into Cadence Allegro.
There are imports for PADs and PCAD but nothing for BS in particular.
You help will be appreciated.
Regards
Sam
Other related posts:
