[PCB_FORUM] Re: Anyone have problems with DXFout on 15.2?

Hi Gene,

I've DXF'd from 15.2 multiple times since installing it, and it's always
worked. Are you sure it's re-writting the log file each time it quits with
no errors? Yuo might be looking at an old log file. Have you tried moving
the .brd file to the /temp dir and trying it there to see if it's a
network issue? Might be.

Hope this helps.

Mitch

>
> I checked my path names... no spaces.  GRIN
>
> I cannot seem to DXF out.  I just changed to Version 15.2, so this is a
> new issue, and I do have the 10-5-04 ISR installed.
>
> The command line says: "E- DxfFile had errors - use Viewlog to review the
> log file."
>
> Only there are no errors in the viewlog... it seems quite happy, except
> for one thing... it is using the wrong Layer conversion file, and trying
> to write to the wrong DXF file name.
>
> That latter part really seems like an Allegro issue...
>
> Any suggestions folks?
>
> Gene Carman
> gcarman@xxxxxxxxxxxxxxx
> -----------------------------------------------------------
> To subscribe/unsubscribe:
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
>
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
> Want to post a job listing ?  DON'T DO IT HERE!
> Better yet, join our jobs listing forum.
>
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
>



-----------------------------------------
Stay ahead of the information curve.
Receive PCB news and jobs on your desktop daily.
Subscribe today to the PCB CafeNews newsletter.
[ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ]
It's informative and essential.
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: