[ibis-macro] Re: BIRD to clarify Usage Out and InOut parameters.
- From: "Muranyi, Arpad" <Arpad_Muranyi@xxxxxxxxxx>
- To: "IBIS-ATM" <ibis-macro@xxxxxxxxxxxxx>
- Date: Thu, 24 Mar 2011 09:54:53 -0700
Thank you Walter for writing this proposal.
I was hoping to address this topic one way
or another, and your document is a good
start in that direction. I will have to
read it to see if it addresses the questions
I had in my mind...
Thanks,
Arpad
===============================================
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Walter Katz
Sent: Thursday, March 24, 2011 11:35 AM
To: IBIS-ATM
Subject: [ibis-macro] BIRD to clarify Usage Out and InOut parameters.
All,
There seems to be continued confusion on what the DLL is required to do
for Out and InOut parameters, and what the simulator is required to do
with the values of Out and InOut parameters returned from the DLL I am
enclosing a BIRD that should clarify this. If we can agree on the
content of this BIRD, then these rules can be incorporated in the
numerous other BIRDs that are in process.
Walter
Walter Katz
wkatz@xxxxxxxxxx
Phone 303.449-2308
Mobile 720.333-1107
Other related posts:
