Not hearing your temporary beacon, but V31HQ/b is 559 to 589 on 28.2580
just below the frequency you posted.
73, Keith, WB2VUO
Amherst, NY:Grid FN02ox
Cell: 716.481.8840 (Voice or Text)
On Sun, Apr 7, 2024, 13:06 ac5jm @ aol . com <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Tinkeritis has struck again.
I'm running another temporary beacon, this time on 28.2587 MHz and would
appreciate reception reports. Unfortunately the band is in a slump at the
moment.
I've cobbled together an Arduino UNO, an Si5351 chip, and a Pace model
10-2 CB and I'm able to get 7 or 8 watts out of it by increasing the supply
voltage to about 18 volts or so after a re-tune to 10 meters. The specs
on the transistors say they're good for much higher than that and there
aren't any low voltage caps to blow, just a 12v panel lamp that I don't
care about. I just connected the output of the Si5351 directly to a
crystal socket.
I may look at putting a 6 meter beacon on the air. I've got an old low
band Motorola Maxtrac radio on the shelf that has been converted to 6
meters so I just need to come up with a way to key it cleanly.
Thanks 73,
Jerry AC5JM
