I've been trying to help Joerg Schilling test his cdtools. Can anyone answer his question? ---------- Forwarded message ---------- From: Joerg Schilling <Joerg.Schilling@xxxxxxxxxxx> Date: Sun, Feb 8, 2009 at 1:11 PM Subject: Re: Haiku -- cdrecord results : To: mattmadia@xxxxxxxxx Matt Madia <mattmadia@xxxxxxxxx> wrote: > Here's a link if you wish to share this with others, it's valid forever: > http://haiku.pastebin.com/f3aaf35f3 > > /objects/schily-dist/cdrecord/OBJ/bepc-haiku-gcc> cdrecord -dev=9,0,0 > /objects/haiku.gcc2/walter.image > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive > dependent defaults. > Cdrecord-ProDVD-ProBD-Clone 2.01.01a57 (i586-pc-haiku) Copyright (C) > 1995-2009 Jg Schilling > cdrecord: WARNING: Cannot set priority on this OS. > cdrecord: WARNING: This causes a high risk for buffer underruns. > scsidev: '9,0,0' > scsibus: 9 target: 0 lun: 0 > Using libscg version 'schily-0.9'. > Device type : Removable CD-ROM > Version : 2 > Response Format: 2 > Capabilities : > Vendor_info : 'PLEXTOR ' > Identifikation : 'DVDR PX-760A ' > Revision : '1.02' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SPEEDREAD > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > cdrecord: WARNING: Cannot set priority on this OS. > cdrecord: WARNING: This causes a high risk for buffer underruns. > Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > cdrecord: write_g1: scsi sendcmd: no error > CDB: 2A 00 00 01 4D 9D 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: F0 00 03 00 01 4E 33 0A 00 00 00 00 0C 07 00 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x0C Qual 0x07 (write error - recovery needed) Fru 0x0 > Sense flags: Blk 85555 (valid) > cmd finished after 0.070s timeout 200s > write track data: error after 174909440 bytes > cdrecord: A write error occured. > cdrecord: Please properly read the error message above. > cdrecord: flush cache: scsi sendcmd: no error > CDB: 35 00 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.000s timeout 200s > Trouble flushing the cache > /objects/schily-dist/cdrecord/OBJ/bepc-haiku-gcc> Is there any kind of automated removable media mounter on Haiku? If yes, you need to disable it before you start to write with cdrecord. Jörg