[guispeak] Re: problem with outlook 2 k
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <guispeak@xxxxxxxxxxxxx>
- Date: Wed, 29 Dec 2004 14:17:35 -0000
Hi Gary,
Now you've got me confused. Microsoft Exchange Server is a
special mail program which normally runs on a network server
and acts like a kind of postal sorting office for e-mail in
and out of your network. That's what I run here for all our
office e-mail.
Is your 98SE system part of a network, or does it connect to
the Internet via a modem or cable connexion of its own?
I take it you are not using the 98SE machine to send your
list e-mail, as that appears to be coming from Outlook
Express and not Outlook.
George.
-----Original Message-----
From: guispeak@xxxxxxxxxxxxx [mailto:guispeak@xxxxxxxxxxxxx]
On Behalf Of Gary Metzler
Sent: 29 December 2004 13:53
To: guispeak@xxxxxxxxxxxxx
Subject: [guispeak] Re: problem with outlook 2 k
Hi George,
The only exchange server I have is the one from windows
messaging. It seems that I un-installed outlook and
re-installed it (don't ask me why) this is when I started
getting the error message. When I try to set up the
ms-exchange server under mail in control panel I don't know
what information to put in the name field. I hope this
information is of some help thanks,
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <guispeak@xxxxxxxxxxxxx>
Sent: Wednesday, December 29, 2004 7:35 AM
Subject: [guispeak] Re: problem with outlook 2 k
> Hi Gary,
>
> This might seem a dumb question, but do you have an
Exchange
> Server installed somewhere that you go through?
>
> George.
>
> -----Original Message-----
> From: guispeak@xxxxxxxxxxxxx
[mailto:guispeak@xxxxxxxxxxxxx]
> On Behalf Of Gary Metzler
> Sent: 29 December 2004 02:46
> To: guispeak@xxxxxxxxxxxxx
> Subject: [guispeak] problem with outlook 2 k
>
> Hi All,
>
> I recently installed ofice 2 k on my windows 98 se
machine.
> When I bring up outlook I get an error message as follows:
> The server containing the global address list is no longer
> available.
> I must have changed something but I can't remember what.
> What information goes into the ms exchange profile? Any
> help would be most appreciated.
> thanks,
> Regards, Gary Metzler
> Outta Sight Travel, Inc.
> Phone: 772-336-8747
> Fax: 772-336-8595
> E-mail: gmtravel@xxxxxxxxxxxxx
> http://www.outtasighttravel.com
>
> ** To leave the list, click on the immediately-following
> link:-
> **
>
[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** guispeak-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
> the
> ** immediately-following link:-
> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> This Message has been scanned for viruses by McAfee
Groupshield.
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** guispeak-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
the
> ** immediately-following link:-
> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
This Message has been scanned for viruses by McAfee Groupshield.
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
