[guispeak] Re: new trekker
- From: Andy Baracco <wq6r@xxxxxxxxxxxx>
- To: guispeak@xxxxxxxxxxxxx
- Date: Wed, 07 May 2008 21:14:15 -0700
hello Debra,
i would strongly suggest that you join the Trekker list. There are
many expert level Trekker users on that list, and, occasionally,
someone from Humanware will participate. As you go along, you will
most likely have many questions, and will occasionally need help and
tech support. The trekker list is a good place to get whatever info
and help you need.
To join, simply send a blank message to:
trekker-subscribe@xxxxxxxxxxxxxxx
if you also have the Maestro option, there is a list for that
to. Simply send a blank message to: maestro-pda-subscribe@xxxxxxxxxxxxxxx
Take care,
Andy
At 04:41 PM 5/7/2008, you wrote:
Hello,
I just received a new trekker and am at my wit's end as to where to
begin. I need a really geeky person to help me with this. I thought
I could, but I am stumped. If it has to be done over the phone,
email me privately with you number and time you want me to call
since I am on a flat rate plan. I have supposedly installed
activesync. I think the USB port is identified by the computer, as
it hadn't been before. What do I do now. Thanks for any help.
Debra Hernstrom
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
