[guispeak] Re: a guispeak phone conference? why not!
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <guispeak@xxxxxxxxxxxxx>
- Date: Sun, 15 May 2011 11:50:15 +0100
Unfortunately David is correct here. Anyone outside of the States
would certainly be charged at International telephone call rates.
Skype is a possible option, but I think their "conference" type calls,
while free, are limited to 10 people.
George
(Moderator)
-----Original Message-----
From: guispeak@xxxxxxxxxxxxx [mailto:guispeak@xxxxxxxxxxxxx] On Behalf
Of David hilbert Poehlman
Sent: 15 May 2011 08:54
To: guispeak@xxxxxxxxxxxxx
Subject: [guispeak] Re: a guispeak phone conference? why not!
only problem is mine needs to be worldwide so can't be in real time
and with a toll number, it will be prohibitive for some.
On May 15, 2011, at 2:27 AM, Harry Brown wrote:
Hi all,
Now of course, we all help each other on this list, but what if,
guispeak would have a free phone conference? The subjects could be
limitless! Anything gui related! Training, problem solving,
accessability issues, etc.!
see below!
Harry
Hi all,
I just checked out my old phone conference room, and it changed to a
new number, but I need to host a conference with some people in the
federal government to deal with government security.
So, I thought I'd give you a copy of this info, so if you need a free
phone conference room, you'll be able to set one up!
The information is below!
Harry
How to Host, or Join a Free Phone Conference
section 1. For conference coordinators
If you want to host a conference:
step 1. Call 218-936-1200
step 2. If this is your first time hosting a conference, you must
enter a conference code. This must be at least 6 digits.
step 3. Then, press the pound key.
step 4. You will be told what numbers you pressed, and if it's
correct, then, press the 1 key, and you're in the conference.
step 5. You need to be there 5 minutes earlier than everyone else, to
get the conference room opened.
step 6. You as the coordinator, and anyone else can do the following,
while you're in the conference:
press *0 to exit the conference, and when you do, it will say, "if
you've hit the key to exit the conference, press 1, otherwise press 2
to return to the conference."
press *1 to enter a private conference with others in the conference,
but not the whole group.
*2 to get your caller code,
*4 to hear this help message again,
*6 to either mute or unmute your phone.
*NOTE--please get this next section to all conference attendees prior
to the conference, so they can have this information. Section 2,
begins on the next page below. You'll see some blank lines below,
then you'll see the section. I did this, to start the next section at
the top of a page.
section 2. For people who want to come to the conference
If you want to attend the conference:
step 1. Call 218-936-1200
step 2. You must enter a conference code. This must be at least 6
digits. This is the code that the conference coordinator gave you
prior to coming to the conference.
step 3. Then, press the pound key.
step 4. You will be told what numbers you pressed, and if it's
correct, then, press the 1 key, and you're in the conference.
step 5. You as a conference attendee, can do the following, while
you're in the conference:
press *0 to exit the conference, and when you do, it will say, "if
you've hit the key to exit the conference, press 1, otherwise press 2
to return to the conference."
press *1 to enter a private conference with others in the conference,
but not the whole group.
*2 to get your caller code,
*4 to hear this help message again,
*6 to either mute or unmute your phone.
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
