[gps-talkusers] Re: Having problems installing 5.3:

  • From: "Mary Ellen Earls" <meearls@xxxxxxx>
  • To: <gps-talkusers@xxxxxxxxxxxxx>
  • Date: Sun, 22 Feb 2009 17:22:38 -0700

Thanks but I am using a pk. Does this apply for that as well? I will keep these 
instructions because I do have an mpower.
Many thanks.
Mary Ellen Earls
  ----- Original Message ----- 
  From: Kevin Chao 
  To: gps-talkusers@xxxxxxxxxxxxx 
  Sent: Sunday, February 22, 2009 4:43 PM
  Subject: [gps-talkusers] Re: Having problems installing 5.3:


  Hi Mary Ellen, 

   

  I would suggest doing the upgrade from 3.5 to 5.03 in the following order: 

  1.       123 Reset 

  2.       U for Utilities 

  3.       I for Install KeySoft Extensions 

  4.       Locate and Run "gpsuninstaller_pk_mpower"

  5.       You will be prompted to do a reset. Instead of performing a no-key 
reset. I would instead perform a 456 Reset. 

  6.       Now, repeat steps 2-4

  But locate and install "gps_5_03_complete_install_mpower"

  7.       You should be all set to go now. 

  Kevin 

   

  From: gps-talkusers-bounce@xxxxxxxxxxxxx 
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Mary Ellen Earls
  Sent: Sunday, February 22, 2009 3:29 PM
  To: gps-talkusers@xxxxxxxxxxxxx
  Subject: [gps-talkusers] Having problems installing 5.3:

   

  Hi!

  Here is what I have done to install the 3.5 upgrade. I have done the reset 
with Braille keys 1-2-3 held down.

  Gone into the Utilities then applications program and run the gps uninstaller.

  Now I start the instalation program and first it says "The file gps.dll which 
already exists is newer than the one you wish to copy. To copy this file over 
press enter, to skip this file press space e. Ok so first I pressed the space 
e. and after an instalation I pressed reset and went back in the main menu and 
when I pressed N. I got the message that gps 5.3 was unable to run.

  Ok, back to square 1. I did another reset ran the uninstaller went back to 
Utilities ap program ran the install pressed enter on copy the gps.dll and 
heard the message Not enough storage is available to run this file.

  Ok so I decided to do the reset with the 4-5-6 keys held down and basically 
the same thing. I am missing something somewhere along the line but don't quite 
know.

   what.

  Thanks in advance.

  Mary Ellen Earls

Other related posts: