For those of you who have upgraded to Keysoft 7 on the mPower or
BrailleNote Classic, your GPS version 3.3 should continue to work.
You might have to reinstall it but everything will work normally.
Since GPS is under the "Navigation" menu under Keysoft 7, it takes a
while to get used to pressing N from the Main Menu instead of G,
which will now get you Games.
On the PK with Keysoft 7, you will need a free GPS 3.3.1 version as
the directory structure has changed on the PK to make it the same as
the mPower. Email your serial number for your PK to
Sheila@xxxxxxxxxxxxxxxx for the 3.3.1 file.
You will also notice slightly different behavior under Keysoft 7 with
regard to activating your Bluetooth GPS receiver. Under Keysoft 6 on
the mPower, you should be very familiar with 3 steps for activating
the receiver which are, Activate, Reset and Activate again. Under
Keysoft 7, it is no longer necessary to reset and reactivate. All you
have to do is to Activate Activesync once if you have performed a reset.
On the PK under KS6, you had to deactivate and reactivate after doing
a reset. Under KS7, once you do a reset, the PK is already
deactivated and you just have to activate it once.
You may find that you need to pause at the Main menu for 5 seconds or
so before pressing N for Navigation, otherwise you may get a
Bluetooth not connected message.
A new Getting Started document has been adjusted with these Keysoft 7
connectivity details.
Mike
Michael G. May
CEO Sendero Group
MikeMay@xxxxxxxxxxxxxxxx http://www.SenderoGroup.com
1-888-757-6810, Fax (530) 757-6830, Mobile (530) 304-0007 Sendero Group, LLC 1118 Maple Lane, Davis, CA 95616-1723, USA
Latitude, 38 33 9.239 North Longitude, 121 45 40.145 West