[gps-talkusers] Re: GPS 3.3 with Keysoft 7

Mike 

3.3 is arriving tomorrow so hopefully all will be well. 

- Liam 

-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Michael May
Sent: 29 January 2006 23:17
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: GPS 3.3 with Keysoft 7


Liam,

There is no patch required. For the PK, there is just this 3.3.1, 
which deals with some slightly different directory procedures.

If you have a PK, send your SN to Sheila@xxxxxxxxxxxxxxxx for the 
3.3.1 GPS exe.
Mike

At 02:41 PM 1/29/2006, you wrote:
>Mike
>
>I've just installed ks7 on a PK with gps 3.1 already on board.  It
>installed without any problems except for a minor quirk when setting
the
>POI folder.  I had to swtich from directory to folder view when
entering
>the destination folder. If I didn't it reported that it couldn't find
>the storage card, which I assume is related to it being called compact
>flash under ks 7.  Can I assume that I was sent the right upgrade and
>don't need any extra files?
>
>I also was lead to believe that for 3.3 I need an extra patch to get
>blue tooth to work?  Sounds odd?  Why ship something you know needs a
>patch? It all seemed confused so I guess when it arrives on Tuesday
I'll
>find out.
>
>- Liam
>
>-----Original Message-----
>From: gps-talkusers-bounce@xxxxxxxxxxxxx
>[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Michael May
>Sent: 29 January 2006 18:55
>To: GPS-talkusers-freelists.org
>Subject: [gps-talkusers] GPS 3.3 with Keysoft 7
>
>
>For those of you who have upgraded to Keysoft 7 on the mPower or
>BrailleNote Classic, your GPS version 3.3 should continue to work.
>You might have to reinstall it but everything will work normally.
>
>Since GPS is under the "Navigation" menu under Keysoft 7, it takes a
>while to get used to pressing N from the Main Menu instead of G,
>which will now get you Games.
>
>On the PK with Keysoft 7, you will need a free GPS 3.3.1 version as
>the directory structure has changed on the PK to make it the same as
>the mPower. Email your serial number for your PK to
>Sheila@xxxxxxxxxxxxxxxx for the 3.3.1 file.
>
>You will also notice slightly different behavior under Keysoft 7 with
>regard to activating your Bluetooth GPS receiver. Under Keysoft 6 on
>the mPower, you should be very familiar with 3 steps for activating
>the receiver which are, Activate, Reset and Activate again. Under
>Keysoft 7, it is no longer necessary to reset and reactivate. All you
>have to do is to Activate Activesync once if you have performed a
reset.
>
>On the PK under KS6, you had to deactivate and reactivate after doing
>a reset. Under KS7, once you do a reset, the PK is already
>deactivated and you just have to activate it once.
>
>You may find that you need to pause at the Main menu for 5 seconds or
>so before pressing N for Navigation, otherwise you may get a
>Bluetooth not connected message.
>
>A new Getting Started document has been adjusted with these Keysoft 7
>connectivity details.
>
>Mike
>
>
>
>Michael G. May
>
>CEO Sendero Group
>
>Developers and distributors of BrailleNote GPS
>Distributing BrailleNote, VoiceNote, Miniguide, The Tissot Silen-T
>tactile watch, and the ID Mate bar code reader
>
>MikeMay@xxxxxxxxxxxxxxxx
>http://www.SenderoGroup.com
>
>1-888-757-6810, Fax (530) 757-6830, Mobile (530) 304-0007
>Sendero Group, LLC
>1118 Maple Lane, Davis, CA 95616-1723, USA
>
>Latitude, 38 33 9.239 North
>Longitude, 121 45 40.145 West

Other related posts: