Hi, I just want to make the clarification that you usually don't insert bar lines; you usually change them from a single bar line to a double bar line with or without repeat indications or vice versa. You may actually insert one if you need a forward repeat at the start of a system or if you have some timing problems. It might help to read http://www.dancingdots.com/tsgf3/limebarrepeats.htm Thanks, Albert --- Patrick wrote --- Position your music cursor (the one selecting notes, not the one selecting annotations) after the point you want the bar line to appear. Type CTRL-B. A dialog box will pop up and give you several options for the bar line. Just tab around and check out the options. When you press OK, the bar line will appear before the selected note (unless you select the option to put it at the end of the system.) patrick From: goodfeel-bounce@xxxxxxxxxxxxx [mailto:goodfeel-bounce@xxxxxxxxxxxxx] On Behalf Of Janell Crispin Sent: Wednesday, July 28, 2010 5:41 PM To: goodfeel@xxxxxxxxxxxxx Subject: [goodfeel] inserting bar lines Hi, does anyone out there know how to insert bar lines in a piece using lime aloud. Janell ____________________________________________________________ Penny Stock Jumping 2000% Sign up to the #1 voted penny stock newsletter for free today! http://thirdpartyoffers.juno.com/TGL3131/4c510244778d48fd8dst04duc ** To leave the list, click on the immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** goodfeel-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq