[GeoStL] Re: Problems loading maps to 60cs
- From: Ssudio@xxxxxxx
- To: geocaching@xxxxxxxxxxxxx
- Date: Fri, 25 Mar 2005 20:30:10 EST
In a message dated 3/25/2005 7:02:21 PM Central Standard Time,
happykraut@xxxxxxxxxxx writes:
The GPS is not responding. Please ensure the following and try again:
1. The GPS's interface option is set to Garmin or Host mode.
2. The cable is connected to the correct serial port.
3. The GPS is turned on.
I just upgraded my software, and needed to let it find the proper com port,
and I also had to reset the baud rate to 9600. I have the Legend, but I'm
assuming that your problems might also be solved by changing those options.
Default was 11,000 something and COM1, which weren't the proper values for my
unit.
HTH
Jana
Chosenlass
"If we can't dawdle in the rear, we may as well dawdle in the front."
Other related posts:
