Hi,
I'd like to integrate your init file in the contrib directory of the
galileo repository [0]. Who knows, it might interest other people !
Can you provide me with a name (and email) I should use for correct
authorship ?
Thanks.
Ben.
[0] https://bitbucket.org/benallard/galileo/src/default/contrib/
On Thu, Jan 12, 2017 at 9:43 AM Linux <linux@xxxxxxxxxxxxxxx> wrote:
Hello all,
I was asking earlier on for installing galileo as a service under Debian
but the question didn't make it to the mailing list - in the meantime I
spent quite some time in investigating, testing and checking and think I
found a solution (at least galileo is running fine as a service now,
although I could not test with a reboot yet).
I don't know if what I did is correct and good practice or no. So
comments are welcome and if there is a solid solution then this can
maybe be published/documented for others and maybe even included in
galileo setup somehow. Something I was missing is a log file
/var/log/galileo where I could check (just entries like service started,
stopped, synchronized device XXX successfully, sync skipped, ...)
If I remember correctly the steps I took were:
make a file 'galileo' in /etc/init.d/ (attached down below)
sudo chown root: galileo
chmod +x galileo
sudo systemctl daemon-reload
manual testing with:
sudo ./galileo stop
sudo ./galileo start
sudo ./galileo status
htop
sudo update-rc.d galileo defaults (to register the service for good)
my 'galileo' file in /etc/init.d/:
#!/bin/sh
### BEGIN INIT INFO
# Provides: galileo
# Required-Start: $remote_fs $network $syslog
# Required-Stop: $remote_fs $network $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Synchronization of fitbit devices (galileo daemon)
# Description: Run the galileo daemon which provides background
synchronization service for fitbit devices
### END INIT INFO
# Change the next 3 lines to suit where you install your script and what
you want to call it
DIR=/usr/local/bin
DAEMON=$DIR/galileo
DAEMON_NAME=galileo
# Add any command line options for your daemon here
DAEMON_OPTS="--syslog --no-dump --daemon-period 60000 daemon"
# This next line determines what user the script runs as.
# Root generally not recommended but necessary if you are using the
Raspberry Pi GPIO from Python.
DAEMON_USER=admin
# The process ID of the script when it runs is stored here:
PIDFILE=/var/run/$DAEMON_NAME.pid
. /lib/lsb/init-functions
do_start () {
log_daemon_msg "Starting system $DAEMON_NAME daemon"
start-stop-daemon --start --background --pidfile $PIDFILE
--make-pidfile --user $DAEMON_USER --chuid $DAEMON_USER --startas
$DAEMON -- $DAEMON_OPTS
log_end_msg $?
}
do_stop () {
log_daemon_msg "Stopping system $DAEMON_NAME daemon"
start-stop-daemon --stop --pidfile $PIDFILE --retry 10
log_end_msg $?
}
case "$1" in
start|stop)
do_${1}
;;
restart|reload|force-reload)
do_stop
sleep 1
do_start
;;
status)
status_of_proc "$DAEMON_NAME" "$DAEMON" && exit 0 || exit $?
;;
*)
echo "Usage: /etc/init.d/$DAEMON_NAME {start|stop|restart|status}"
exit 1
;;
esac
exit 0