[frgeek-michiana] Walls/Framework
- From: john jones <rainman121065@xxxxxxxxx>
- To: frgeek-michiana@xxxxxxxxxxxxx
- Date: Fri, 6 Nov 2009 13:56:05 -0800 (PST)
When we were at the table last week and i pushed on the wall,i dont know if
anybody else noticed that wall didnt just move a little,the whole wall
practically swayed,which means the framework is either dry rotted,
split,loose,old whatever have you,and ill bet anybody 5 dollars that parts of
the bottom wall support is un anchord from the floor,my point is before we
start paint and hanging shelving we should try to inspect and remedy that
problem,personally i dont think 37 hardrives falling and hitting me in the head
would feel very good...................................................
--- On Fri, 11/6/09, chuq jackels <chuq00@xxxxxxxxx> wrote:
From: chuq jackels <chuq00@xxxxxxxxx>
Subject: [frgeek-michiana] Re: Warehouse Plan of Attack
To: frgeek-michiana@xxxxxxxxxxxxx
Date: Friday, November 6, 2009, 12:40 PM
ok I just went and got supplies for painting, We HAVE paint trays, roller
heads, painters tarp, corner brushes.
We are borrowing and will have 3 rollers with handles, a flat head shovel,
scaffolding.
Karl is donating a bar code scanner for inventorying.
We need 5 gal. bucket of white (or some other light color) paint which Tom said
he is going to pick up.
So we are almost set for painting to begin on Tuesday!
Chuq
On Fri, Nov 6, 2009 at 2:16 PM, Mike Cook <mikecook@xxxxxxxxxxxx> wrote:
It would be trivial to add plugs if necessary. Thanks
Fr. Robert Bower wrote:
I have two fluorescent fixtures you can have. Be aware they are not plug in to
an outlet fixtures but ones that need to be hard wired. I can't make the
warehouse but I can bring them to the lug on Saturday.
Thanks,
Fr. Robert Bower
Batushka's Web Hosting & Design
frrobert@xxxxxxxxxxxxx
574.850.7982
http://www.batushkas.com
http://www.batushkas.net
Mike Cook wrote:
Be careful of the $9.99 fluorescent fixtures, they usually have quite
undersized ballasts and tend not to last very long. Often you wind up replacing
the bulbs and fixtures. I would recommend using T8 fixtures w/ electronic
ballasts. They are much more energy efficient, put out more and higher quality
light. I would also recommend mounting them on the tables if possible so that
the light is where we need it. I wouldn't hang the lights on a pulley system, I
would mount them no more than 12' off the floor for maximum effectiveness. My
impression was that the overall light level now is suitable for storage and we
would only need additional lighting over the work areas where we are doing
assembly and testing.
I won't be able to be there this Thursday, as I only have enough gas this week
to go to work, but will be there next Tuesday.
-----Original Message-----
From: chuq jackels
Sent: Nov 4, 2009 2:16 PM
To: frgeek-michiana
Subject: [frgeek-michiana] Warehouse Plan of Attack
Some of the items that we came up with that we need to get the
shop up and running are : 8 - 4' Florescent Lights ($9.99 ea. at
Menards) 2 Cases of bulbs (cool-white) for said lights (12.99 ea.
@ Menards ((if I remember correctly)) ), 5 gal. White paint, a
couple of rollers, A push broom a regular broom, and a good metal
dust pan. We will also need some chain to hang the lights from
the ceiling with.
Imre has some scaffolding that we can bring over and use to put
up the lights.
Thinking about the lights, I am thinking it may be an idea to put
the lights on a pulley system so we can lower them down when the
need arises to change the bulbs! I will talk with Imre and see
what he thinks the best idea is for that.
The schedule that we have made (providing materials are available)
11/5 Thursday Night: Deck scrub the floor in the Office area,
wet-dry vac the water up, reaffix some of the loose panels that
are there.
11/10 Tuesday Night: Paint the Office
11/12 Thursday Night: Hang Lights & start the building process
11/17 Tuesday Night: Continue Building
11/19 Thursday Night: Finish building (hopefully)
11/24 Tuesday Night: Closed
11/26 Thursday Night: Closed happy Thanksgiving
12/01 Tuesday Night: Start organizing Office area
12/03 Thursday Night: Continue organizing Office area
12/08 Tuesday Night: Start organize Storage area
12/10 Thursday Night: Finish organizing.
We are going to need some extra hands at the warehouse to get
this stuff done and from my understanding we have a commitment of
2-3 people each night so far, so if anyone is available to help
out please show up!
Thursday night warehouse will be starting about 6:15pm until
about 10pm.
Goose and I talked last night about some things that we need to
get accomplished and one of the main things that we came up with
is that we need to either find a way to have a Thrift store like
all other Free Geeks do, or eBay, Craigslist, yard sale, or
consignment at my shop (25% to the shop 75% to FGM).
Chuq
** This list is PUBLICLY archived. ** PLEASE don't post personal or sensitive
information unless you wish for it to be in the public domain. To visit the
main website for Free Geek Michiana go to http://www.freegeekmichiana.org To
post to the list send email to frgeek-michiana@xxxxxxxxxxxxxx The archive is
available at //www.freelists.org/archives/frgeek-michiana/ You may
unsubscribe or change your list settings by going to the list website at
//www.freelists.org/webpage/frgeek-michiana
** This list is PUBLICLY archived. **
PLEASE don't post personal or sensitive information unless you wish for it to
be in the public domain.
To visit the main website for Free Geek Michiana go to
http://www.freegeekmichiana.org
To post to the list send email to frgeek-michiana@xxxxxxxxxxxxxx
The archive is available at //www.freelists.org/archives/frgeek-michiana/
You may unsubscribe or change your list settings by going to the list website
at //www.freelists.org/webpage/frgeek-michiana
Other related posts:
