I have a circular saw and decent sized tablesaw we could use. I agree with Imre that a circular saw would be better (and safer) for cutting sheet goods. -----Original Message----- >From: Tom Brown <tbrown@xxxxxxxxxxxxxxxxx> >Sent: Nov 4, 2009 12:12 PM >To: frgeek-michiana@xxxxxxxxxxxxx >Subject: [frgeek-michiana] Carpentry for warehouse > >Goose and Chuq: > >I saw Imre this morning. If someone relays the ideas to Imre, he is willing >to draw up plans for cutting and building work benches and shelves. He might >help with the construction. > >Imre recommends a circular saw to cut the lumber unless a table saw has a >large table. Too small tables flex plywood sheets and make the cuts more >difficult and less accurate. > >As soon as Imre makes a materials list, let me know so we can coordinate >purchasing and delivering the lumber and fasteners. > >Tom > > > >** This list is PUBLICLY archived. ** >PLEASE don't post personal or sensitive information unless you wish for it to >be in the public domain. > >To visit the main website for Free Geek Michiana go to >http://www.freegeekmichiana.org > >To post to the list send email to frgeek-michiana@xxxxxxxxxxxxxx >The archive is available at //www.freelists.org/archives/frgeek-michiana/ > >You may unsubscribe or change your list settings by going to the list website >at //www.freelists.org/webpage/frgeek-michiana > ** This list is PUBLICLY archived. ** PLEASE don't post personal or sensitive information unless you wish for it to be in the public domain. To visit the main website for Free Geek Michiana go to http://www.freegeekmichiana.org To post to the list send email to frgeek-michiana@xxxxxxxxxxxxxx The archive is available at //www.freelists.org/archives/frgeek-michiana/ You may unsubscribe or change your list settings by going to the list website at //www.freelists.org/webpage/frgeek-michiana