[foxboro] xref.tar
- From: "David Standerfer" <DStander@xxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 16 Jan 2002 13:58:55 -0700
Hi list, I have loaded Mark Dumond's cross referencing utility on a =
non-critical AW51E and it looks like it's going to be a very useful =
utility for us up here. Thanks for providing it to us all Mark!=20
After running it though I tried to copy one of the output files, xref_all.c=
sv, to a DOS floppy so that I could analyze it in my office. Our IA system =
is not connected to our mill business network yet. The command I used was: =
cp xref_all.csv /pcfs and the file size was about MB. This resulted in a =
core dump of the AW which surprised me, to say the least. I allowed the =
station to reboot and tried again with the same result. I didn't receive =
any IO error messages, it just crashed. The next time I compressed the =
file first and it then copied without a problem. I'm just wondering if any =
of you have run into this problem before. Thanks for the help.
Dave Standerfer
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist
list info: //www.freelists.org/list/foxboro
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
