What parameter? What block type? Did you check to see if the target parameter is secured? You can use /opt/fox/bin/tools/oma to do that. Make a list - m Open the list - o Get the status bits - g <index> You can get help from the 'h' command or consult the Software Utilities manual (B0193JB). Regards, Alex Johnson Invensys Operations Management 10900 Equity Drive Houston, TX 77041 +1 713 329 8472 (desk) +1 713 329 1600 (operator) +1 713 329 1944 (SSC Fax) +1 713 329 1700 (Central Fax) alex.johnson@xxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Leonardo Mercado Sent: Monday, October 03, 2011 12:19 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Write to IAS Block from AIM*OPC using Matrikon Explorer for testing Dear List, I'm trying to send data from AIM*OPC to one FOXBORO Block "CMP:BLK.PRM" but AIM*OPC configurator start to count failures I add that block to AIM*OPC For DA configurator with R/W selection and used the Auto Ramp option on Matricon but it does't work Any Idea what is wrong in my configurator.....is there any parameter I need to add/edit on aimapi.cfg Thanks for your help Leonardo Mercado Instrument Supervisor _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave