Re: [foxboro] What version is what?
- From: "Johnson, Alex P \(IPS\)" <alex.johnson@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 26 Jun 2007 23:27:27 -0400
Re: V8 on Nodebus
V8 equipment must be connected to the Mesh network; it cannot attach to
a Nodebus based network. =
The Nodebus is standard A/B redundant network and each station attached
to it presents a network interface with the same MAC address on both the
A and B sides.
The Mesh network has a totally different approach to networks; it weaves
the switches together such that there are multiple paths between any two
stations.
As you might imagine, the communication software is different on the
Mesh than on the Nodebus.
Re: FV 10 on V7.1.1
It will not work.
Regards,
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of David Johnson
Sent: Tuesday, June 26, 2007 1:55 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] What version is what?
Hi guys,
This may be quite obvious, but I am still seeking clarification. I am
needing to load a graphics testbed, and would like to be able to
temporarily
replace an I/A version 6.2 NT workstation using a DNBT connection, with
an
XP workstation running Foxview/FoxDraw 10.1. (This will be goin MESH
later
this year.) The FoxView/FoxDraw CD says for 8.X systems. Can I connect
an
8.X system to a nodebus via DNBT or is it strictly MESH. If so, will
FoxDraw v10.1 run on an I/A v 7.1.1 PC although it's not "officially"
supported.
Thanks,
David
-- =
"For my next trick I'll need a volunteer."
=
=
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=
Confidentiality Notice:
The information contained in this electronic message and any attachment(s) =
to this message are intended for the exclusive use of the recipient(s) and =
may contain confidential, privileged or proprietary information. If you are=
not the intended recipient, please notify the sender immediately, delete a=
ll copies of this message and any attachment(s). Any other use of the E-Mai=
l by you is prohibited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
