Re: [foxboro] What version is what?

David,

I do not have test equipment to verify the actual operation (defaults, =
etc), but my understanding is no, you cannot do this.

The DNBT has one ethernet port and one serial port.  The AW70 configured =
for connection to DNBT gets confirmation of the letterbug inserted into =
the DNBT from the DNBT's serial port. Once the serial port confirms the =
letterbug, the ethernet port is ready for communication.

The AW70 configured for connection to the MESH will not expect any =
serial comnmunication and will not be able to toggle the DNBT from =
Nodebus A to Nodebus B. This AW will have two ethernet ports expecting a =
connection to the MESH.

Terry


=20

-----Message d'origine-----
De : foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] =
De la part de David Johnson
Envoy=E9 : June 26, 2007 2:55 PM
=C0 : foxboro@xxxxxxxxxxxxx
Objet : [foxboro] What version is what?

Hi guys,
This may be quite obvious, but I am still seeking clarification.  I am =
needing to load a graphics testbed, and would like to be able to =
temporarily replace an I/A version 6.2 NT workstation using a DNBT =
connection, with an XP workstation running Foxview/FoxDraw 10.1.  (This =
will be goin MESH later this year.) The FoxView/FoxDraw CD says for 8.X =
systems.  Can I connect an 8.X system to a nodebus via DNBT or is it =
strictly MESH.  If so, will FoxDraw v10.1 run on an I/A v 7.1.1 PC  =
although it's not "officially"
supported.

Thanks,
David

--
"For my next trick I'll need a volunteer."


=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe:      =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: