Re: [foxboro] Splitting one node increases the display call-up time?
- From: "Dimitris Legakis" <legourasj@xxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 09 Feb 2007 15:01:24 +0000
Acually there is no unresolved links in any of my pages. I have checked that
already.
Regarding the CP loads, they are:
CP1: 83.4%
CP2: 87.2%
CP3: 68,4%
CP4: 87.4%
CP5: 86.2%
CP6: 42.6%
CP7: 78.8%
CP8: 78.4%
CP9: 25.2%
I am also using FOXVIEW for the display of the pages.
I have tried to symplify the symbols that were in use in all pages and the
speed has been improved, but is still slower than the desired. I also have
the impression that sometimes the static objects appear first, some dynamic
object appear a little time later and the rest in the end.
regards,
Dimitris
>From: "Johnson, Alex P (IPS)" <alex.johnson@xxxxxxxxxxxxxxxx>
>Reply-To: foxboro@xxxxxxxxxxxxx
>To: <foxboro@xxxxxxxxxxxxx>
>Subject: Re: [foxboro] Splitting one node increases the display call-up
>time?
>Date: Fri, 9 Feb 2007 08:16:38 -0500
>
>I seriously doubt that your issues are related to the speed of the
>network.
>
>It is far more likely that the CP's are heavily loaded and/or there are
>missing tags on the displays. To check the former, use the Station
>block. To check the latter use dedit or d_edit (depending on DM or FV)
>and run the validation check.
>
>Regards,
>=20
>Alex Johnson
>Invensys Systems, Inc.
>10900 Equity Drive
>Houston, TX 77041
>713.329.8472 (voice)
>713.329.1700 (fax)
>713.329.1600 (switchboard)
>alex.johnson@xxxxxxxxxxxxxxxx
>
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
>On Behalf Of Dimitris Legakis
>Sent: Friday, February 09, 2007 4:14 AM
>To: foxboro@xxxxxxxxxxxxx
>Subject: [foxboro] Splitting one node increases the display call-up
>time?
>
>Hello all,
>
>I have a configuration with 9 CP60s in one Node of two NCNIs that are=20
>conncted to two Switches were the Workstatins are linked (through
>RCNIs).
>
>The idea is to split the node into three separate nodes. i.e. use three=20
>couples of NCNIs, one couple for each three CPs and connect them
>separately=20
>on the two switches. As a result, this should share the traffic amoung
>three=20
>different paths. The result we are expecting is a Faster response on the
>
>graphic displays. Bear in mind that up to now some displays require more
>
>than 3-4 seconds to refresh all their data.
>
>Do you think that this will improve the display call up times? Has
>anyone=20
>found a way to improve the display call-up times? any suggestions?
>
>thank you all in advance
>regards,
>Dimitris
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today it's FREE!
>
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>=20
>=20
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>=20
>foxboro mailing list: //www.freelists.org/list/foxboro
>to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
>to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
>=20
>
>
>
>Confidentiality Notice: =0AThe information contained in this electronic m=
>essage and any attachment(s) to this message are intended for the exclusi=
>ve use of the recipient(s) and may contain confidential, privileged or pr=
>oprietary information. If you are not the intended recipient, please noti=
>fy the sender immediately, delete all copies of this message and any atta=
>chment(s). Any other use of the E-Mail by you is prohibited.=0A
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list: //www.freelists.org/list/foxboro
>to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
