As I recall, the Window machines had a computed hostid. The AIM control panel will tell you the hostid and you may have to contact your Foxboro rep to get a new license that takes this hostid into the algorithm. > Date: Mon, 30 Mar 2015 18:03:05 +0000 > From: dmarc-noreply@xxxxxxxxxxxxx > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] Restoring the engineers station using Symantec > > I plan on setting up RAID 1 on our engineers station soon. We're using the > Foxboro supplied Symantec backup software. I did a test restore run on a > standalone machine and everything seems to work fine except for the AIM > historian. I'm getting an error that say the historian isn't configured and I > am unable to select it (all options are grayed out). The historian files are > located on the engineers stations. Could this be because it isn't plugged > into the DCS to see the system and licensing? > Thanks,Jeff > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave