I had another thought - though it seems unlikely. Could you have rebooted the AW while in the ICC or while running the ICC Driver Task? If that were to occur, the changes made to the workfile would have been left abandoned in a temporary location used by the ICC and not copied back to the main repository. At the same time, the CPs corresponding change would remain in the CP. Does this make sense? Alex Johnson Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx For the latest information on ArchestrA, go to www.invensys.com/Archestra.html. -----Original Message----- From: Brian Long [mailto:blong@xxxxxxx] Sent: Wednesday, October 29, 2003 9:57 AM To: Foxboro Subject: [foxboro] Recovering Blocks Does anybody have a solution for recovering blocks that show up in select but not in ICC. This has occurred in a CP40B. Also, how does this happen? Thanks, Brian Long E&I Superintendent Green Bay Packaging Arkansas Kraft Division _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave