Re: [foxboro] Recovering Blocks
- From: duc.do@xxxxxxxxxxxxxx
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 29 Oct 2003 11:13:22 -0500
I can answer the why: your workfile is corrupted.
The CIOCFG relies on the workfile to display what's in the CP. The Select
screen shows what's running in the CP memory. So that's why you see the
discreppancy when the workfile is corrupted.
Read Helpful Hint HH980 for procedures on how to recover from this.
Duc
--
Duc M. Do
Dow Corning Corp.
Carrollton Plant
Carrollton, KY, US
-----Original Message-----
From: Brian Long [mailto:blong@xxxxxxx]
Sent: Wednesday, October 29, 2003 10:57 AM
To: Foxboro
Subject: [foxboro] Recovering Blocks
Does anybody have a solution for recovering blocks that show up in select
but not in ICC. This has occurred in a CP40B. Also, how does this happen?
Thanks,
Brian Long
E&I Superintendent
Green Bay Packaging
Arkansas Kraft Division
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
