Re: [foxboro] OAJ on AW70

  • From: Stefano Persico <spersico@xxxxxxxxx>
  • To: foxboro@xxxxxxxxxxxxx
  • Date: Thu, 09 May 2002 23:58:03 +0200

My AW70 is a new 6.2 installation.
After that i cofigured a cmp10 with 3 printers to use a software on a PC
running Win 2K to capture alarms.
I decided to dedicate 1 printer to OAJ trying to configure it ready at boot up.

I will try to make what you suggested in init.user file and than let you know
the results.

Thanks 4 all

William C Ricker wrote:

> Yes, Alex. It is better to put these changes there.
>
> I should explain that I changed 'wp51_glbls.all' because
> others on the project had already made significant changes
> in that file, and it was therefore established on the
> project as the place to make this type of change.
>
> The 'init.user' has the advantage of existing for this
> purpose, and therefore works better.  It survives Software
> Install operations and upgrades; 'wp51_glbls.all' does not.
>
> And Mr. Persico, this brings up another question.  Is it
> possible that the changes you made were reversed by a Software
> Install or upgrade?
>
> William C. Ricker
> FeedForward, Inc.
> Marietta, GA, USA
> wcricker@xxxxxxxxxxxxxxx
> 770-426-4422
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Johnson, Alex
> (Foxboro)
> Sent: Thursday, May 09, 2002 9:50 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: Re: [foxboro] OAJ on AW70
>
> You folks might want to checkout B0193CW. It recommends putting the changes
> in init.user.
>
> Regards,
>
> Alex Johnson
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: