Try /opt/fox/bin/tools/som The opening screen shows how many entries are on the import table. The imp command shows the names of the objects currently on the import table. Use rsom to check the import table of a CP You should note that objects may be dropped from the import table if they temporarily become unaccessible (like when their hosting station goes off-line). -----Original Message----- From: Ajay_Tathgir@xxxxxxx [mailto:Ajay_Tathgir@xxxxxxx] Sent: Thursday, May 09, 2002 3:10 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Calculations IND block Going slightly off the track, a query on the IMPORT table. - is it possible to have a look at what the import table is holding at any point of time Thanks & Regards Ajay Tathgir Reliance Industries Limited Mumbai - India _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave