Re: [foxboro] (No Thread-Topic: [foxboro]
- From: "Landry, Scott" <Scott.Landry@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 21 Jul 2011 13:21:07 -0400
Rick,
Never heard of a Profibus Integrator 15.
Foxboro has the FBM223 (use config pulldown Profibus Config) and the
FBM222 (use IEE to import GSD and configure).
Is your Com15 connected to a PLC that has a Profibus card ?? What
image is the Com15 using ?
Regards,
Scott
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Rick Mol [Rick.mol@xxxxxxxxxxxxxxx]
Sent: Thursday, July 21, 2011 11:49 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro]
All wise and all knowing list,
Does anyone on the list have experience with setting up Profibus
communications to the IA with WL series breakers? We will be using the
COM15 module.
I need a few pointers in the right direction.
Register addressing structure for control bytes, configuration software
(Power Switch ES?) and whether anyone has used the WinPM.net software. We
were looking at setting up remote access for the electrical group, WinPM.net
looked like a nice way to accomplish that.
Any feedback appreciated.
Regards,
Rick Mol
Coyote Technologies
Rick.Mol@xxxxxxxxxxxxxxx
231.750.6348
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
