Ron:
There are three options in "System Definition"
- US
- European
- ISO
There is a date format variable that gets set that loads in one of =
these 3 values.
There is a way to change this without having to change your sysdef =
and re-committing.
I can't find the procedure however TAC should be able too (it might=
even be a helpful hint)
Thanks
Peter
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On=
Behalf Of Ron Schafer
Sent: Wednesday, April 30, 2008 2:14 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro]
Does anyone know if the time box in Foxview can be altered to display secon=
ds? (HH:MM:SS)
Ronald G. Schafer
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Sys=
tems (formerly The Foxboro Company). Use the info you obtain here at your o=
wn risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
