Re: [foxboro] FW: Foxdraw configuration
- From: "Bakke, Richard A" <rabakke@xxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 18 Jan 2002 09:23:30 -0800
Raymundo,
One possibility could be a problem with the Device Monitor. You could
try this.
On one of the 51's (probably one of the AW51E's):
cd /usr/fox/cs
dm_recon t # this causes this 51E to take mastership of Device
Monitor
# (which is for the whole LAN).
dm_recon # to update status of devices that could receive
alarms.
dm_recon d # to dump the status of all devices into the file
cs_dm.current
# (in the /usr/fox/cs directory on the
current master).
Then view the content of the cs_dm.current file.
Rich Bakke
Longview Fibre Co.
RAYMUNDO MENDEZ wrote:
> Hi list, I have the following problems:
>
> We have four I/A nodes, all of them running I/A Version 6.1.2.
> Problem 1: Node A has four AW51E's running Foxview 99.2.1 and one of th=
> e
> AW's is presenting a problem with the Alarm Manager, when the AW is jus=
> t
> rebooted Alarm Manager updates the Alarms, but some minutes later, it s=
> top
> doing that (showing the alarms in the alarm manager) until you reboot i=
> t
> again and the cycle begins again.Annunciator Panel's horn works every t=
> ime
> there is an alarm, ack button at Ann Pnl works to silence it, but Alarm=
>
> Manager window does not show anaything. Process button (to call up the
> alarm manager window) is always green in that particular AW.
> Problem 2: Node B has one AW51A, one AW51B and two WP20's, all of them
> running Display Manager. One of these WP20=B4s is presenting a similar
> problem, when the WP20 is just rebooted Alarms are updated, but some
> minutes later, it stop doing that (showing the alarms) until you reboot=
> it
> again and the cycle begins again. Annunciator Panel's horn does not wor=
> k
> every time there is an alarm, neither the ack button at Ann Pnl to sile=
> nce
> it. Alarm "button" (to call up the alarm window) at the Top Menu Bar is=
> not
> blinking for that particular WP.
> Does any of you have any idea of what is going wrong with this modules =
> and
> how to slove it?
> Thanjs in advance for your help.
> Regards
> Raymundo M=E9ndez
> PDVSA Manufactura y Mercadeo
> Refiner=EDa El Palito
> Zona Postal 2023A
> Apartado Postal 102
> Departamento de Automatizaci=F3n Industrial
> Equipo de Asistencia T=E9cnica
>
> Tel=E9fono: 58-242-3603518
> Fax: 58-242-3604766
> E-mail: mendezrw@xxxxxxxxx=
>
> *************** PDVSA´S INTERNET E-MAIL USE ***************
> This message may contain information solely of the interest of PDVSA or
> its businesses. Copying, distribution, disclosure or any use of the
> information contained in this transmission is permitted only to
> authorized parties. If you have received this e-mail by error, please
> destroy it and notify webmaster@xxxxxxxxx or the sender by reply email.
>
> ****** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ******
> Esta nota puede contener informacion de interes solo para PDVSA o sus
> negocios. Solo esta permitida su copia, distribucion o uso a personas
> autorizadas. Si recibio esta nota por error, por favor destruyala y
> notifique al remitente o a webmaster@xxxxxxxxxx
>
>
>
> ___________________________________________________________________
> This list is neither sponsored nor endorsed by The Foxboro Company.
> Use the information obtained here at your own risk. For disclaimer,
> see http://www.thecassandraproject.org/disclaimer.html#maillist
>
> list info: http://www.freelists.org/list/foxboro
> subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
-- No attachments (even text) are allowed --
-- Type: text/x-vcard
-- File: rabakke.vcf
-- Desc: Card for Rich A. Bakke
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist
list info: http://www.freelists.org/list/foxboro
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- References:
- Re: [foxboro] FW: Foxdraw configuration
- From: RAYMUNDO MENDEZ
Other related posts:
- » Re: [foxboro] FW: Foxdraw configuration
- » Re: [foxboro] FW: Foxdraw configuration
- » Re: [foxboro] FW: Foxdraw configuration
- Re: [foxboro] FW: Foxdraw configuration
- From: RAYMUNDO MENDEZ