Oops! That should be /etc/inet/hosts (instead of /etc/fox). I'm doing this by memory, and my memory has never been reliable to start with! Duc On Mon, Mar 2, 2015 at 4:49 PM, Duc M Do <duc@xxxxxxxxxx> wrote: > Joe, > > If you don't want to reboot, you have to change the IP address manually > (and possibly the netmask also) using the ifconfig command, and also edit > the file /etc/hosts (really it's /etc/fox/hosts) to make it permanent. > > ifconfig hme1 down > ifconfig hme1 xxx.yyy.zzz.aaa > ifconfig hme1 up > > Use the proper interface name: hme1, hme2, etc. > > Duc > > > On Mon, Mar 2, 2015 at 3:33 PM, Joseph M. Riccardi <Joe@xxxxxxxxxxxxx> > wrote: > >> Folks, >> I am moving a UNIX Node with a couple of AW51Es to a different subnet. >> What >> files do I have to change for the 2nd Ethernet ports; just the /etc/hosts >> file? I do not have to reboot; correct? >> >> >> Joseph M. Riccardi >> 386-451-7607 Cell >> >> Joe@xxxxxxxxxxxxx <mailto:Joe@xxxxxxxxxxxxx> >> >> "To give real service you must add something that cannot be bought or >> measured with money; and that is sincerity and integrity." - Donald A. >> Adams >> >> >> >> >> _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave