This file should NEVER be edited directly. It should only be changed through ADMC. Unless you know the exact format of the file and the records it is very easy to mess it up. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jeremy Milum Sent: Thursday, September 02, 2004 8:52 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] CAD alarmpage On Thu, 2 Sep 2004 05:52:25 -0400, PAUWELS, DIRK - RSM <dpauwels@xxxxxxxxxxx> wrote: > Does anyone know how the disable certain buttons on the alarm CAD > display, ie "Block display" ? I know how to disable all buttons, but I > can't find any references to disabling one button. Try editing the /usr/fox/customer/alarms/cfg/am_def.cfg file and restarting the alarm manager. I've used this to remove the Mute Horns button before. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave