You can restrict access to any button via environments and access classes. AM uses the same environment files as FV. Remember, though, that changing the FV environment does not change the AM environment. The AM environment must be changed separately. You can configure the access classes for the buttons using ADMC (Config->DispAlmCfg). Kathy -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of PAUWELS, DIRK - RSM Sent: Thursday, September 02, 2004 5:52 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] CAD alarmpage Hi list, Does anyone know how the disable certain buttons on the alarm CAD display, ie "Block display" ? I know how to disable all buttons, but I can't find any references to disabling one button. Maybe variation on =3D=3D$AM_LOCAL N amcmd disable all ? Thanks & rgds, Dirk Pauwels - DCS coordinator Operations Support RSM Belgium T: 32 (0)3 570 95 97 F: 32 (0)3 570 16 09 M: 32 (0)497 428 300 =20 E-mail: dpauwels@xxxxxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave