I guess it's an out of range indication when the ORAO is on, but the alarm is inhibited in some way. At least, that's what it is on our I/A 6.3 system Rgds, Dirk -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Gregory A Hurwitt Sent: donderdag 3 mei 2007 16:09 To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Bright green background in detail display? Cyan background ("smurf") is an out-of-service condition. Red background is I/O Bad. What does a bright green background represent? If this is documented, can anyone point me to the proper document(s)? I'm seeing this on the .RINP and .MEAS parameters of an RIN block. It also propagates to the .MEAS parameter (but not the .PNT) of the downstream AIN block. The upstream ECB201 looks fine in both system management and its detail display. Environment: I/A software version 8.2, AW 70, ZCP270, HART Analog Input FBM 214. Greg Hurwitt BASF Freeport, TX =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave