Re: [foxboro] Backig up AIM Historian configuration

Stan,

As others have noted, saveh50 is for legacy historian.  If you have 
aim*, you will want to use:
/opt/aim/bin/histcsave

This will save a .inp file of your historian which can be used to 
rebuild the instance (but not the data).

Regards,

Kevin FitzGerrell
Carter Holt Harvey, Ltd.
+64 27 460 9994

stan wrote:
> I've got an AW that has destroyed the historian config the last 2 times
> it's been rebooted. I _think_ we have addressesed the problem, but to be
> certain I want to save the AIM historian configuration.
> 
> Do I just go into /opt/fox/hstorian/bin/, and run saveh50? That's what i
> recall, but while it's running, I get a segmetation fault, which wories me.
> I do see that /opt/fox/hstorian/bin/his400.exp seemd to get itt's files
> updated, although a lot of them are zero length.
> 
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: