No. The software that drives the printer has no flexibility. Regards, Alex Johnson Invensys 10707 Haddington Houston, TX 77063 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx <mailto:ajohnson@xxxxxxxxxxx> Come to the Invensys Showcase: http://www.invensysshowcase.com/ <http://www.invensysshowcase.com/> -----Original Message----- From: Ajay_Tathgir@xxxxxxx [SMTP:Ajay_Tathgir@xxxxxxx] Sent: Wednesday, July 10, 2002 10:50 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Alarm Printing Any way that I can make the system print the priority of the alarm also. Right now it prints everything what it shows in CAD but for priority. The system consists of 51B Series stations with 6.1 version and the printer is OKIData connected on COMP10. Regards Ajay Tathgir Reliance Industries Limited Mumbai - India _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
