Re: [foxboro] Ain FLOP
- From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Thu, 12 May 2005 07:52:11 -0400
That is true.
Regards,
Alex Johnson
Invensys Process Systems
Invensys Systems, Inc.
10707 Haddington
Houston, TX 77043
713.722.2859 (voice)
713.722.2700 (switchboard)
713.932.0222 (fax)
ajohnson@xxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Theobald, Martin
Sent: Thursday, May 12, 2005 7:41 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] Ain FLOP
Dirk,
What is the period of the original block (the one with IOMOPT =1)?
I seem to remember that if the FTIM too close (too small) to the Period then
there is no obvious effect. There was a rule of thumb for the minimum value
for FTIM with respect to be Period of the block (but I can't recall what is
was).
Regards,
Martin Theobald
Senior Support Engineer
Field Engineering Services
Main: +44 (0) 1925 837 267
Fax: +44 (0) 1925 831 690
Mob: +44 (0) 7767 87 1989
Invensys Systems (UK) Ltd.
32 Melford Court,
Hardwick Grange,
Woolston,
Warrington.
WA1 4RZ
United Kingdom
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Dirk Pauwels
Sent: 12 May 2005 12:28
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Ain FLOP
We have CP60, version 6.5.1 according to the station block. Tried
checkpointing & exit, delete & undelete, delete & rebuild from scratch
etc... the data is not filtered with iomopt at 1, rerouted to a new AIN
block and IOMOPT = 2 it works. I don't get it?????
>From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>
>Reply-To: foxboro@xxxxxxxxxxxxx
>To: foxboro@xxxxxxxxxxxxx
>Subject: Re: [foxboro] Ain FLOP
>Date: Thu, 12 May 2005 07:21:12 -0400
>
>It is supposed to work. Contact the CSC.
>
>What version of the CP are you running by the way - Check the STATION block
>detail display.
>
>Regards,
>
>Alex Johnson
>Invensys Process Systems
>Invensys Systems, Inc.
>10707 Haddington
>Houston, TX 77043
>713.722.2859 (voice)
>713.722.2700 (switchboard)
>713.932.0222 (fax)
>ajohnson@xxxxxxxxxxx
>
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
>Behalf Of Dirk Pauwels
>Sent: Thursday, May 12, 2005 7:18 AM
>To: foxboro@xxxxxxxxxxxxx
>Subject: [foxboro] Ain FLOP
>
>In an AIN block, if I set FLOP = 1 and Dtime = 0.50 the data gathered from
>FBM channels (IOMOPT= 1) is not filtered, filtering does not work. If I
>create an extra AIN block, IOMOPT = 2 and MEAS = first AINblock.PNT then
>the
>
>filtering option works. I guess it's not possible to filter the data
>directly or do I need to set another parameter?
>
>Thanks,
>
>Dirk Pauwels - DCS coordinator
>Engineering dept.
>Lawter International BVBA
>An RSM Company
>Ketenislaan 1c - Haven 1520
>B-9130 Kallo, Belgium
>T. +32.(0)3.570.95.97/ Mob. +32.(0)497.428.300
>F. +32.(0)3.570.16.09
>E mail: dirk.pauwels@xxxxxxxxxx
>
>_________________________________________________________________
>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list: //www.freelists.org/list/foxboro
>to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list: //www.freelists.org/list/foxboro
>to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_________________________________________________________________
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
