Re: [foxboro] Ain FLOP

these are the block settings:

TYPE   AIN
  DESCRP IR TEMP 1 COOLB 1
  PERIOD 3
  PHASE  0
  LOOPID
  IOMOPT 1
  IOM_ID I03533
  PNT_NO 3
  SCI    3
  HSCO1  150.0
  LSCO1  0.00
  DELTO1 0.01
  EO1    DEG C
  OSV    2.0
  EXTBLK 0
  MA     1
  INITMA 1
  BADOPT 3
  LASTGV 1
  INHOPT 0
  INHIB  1
  INHALM 0x0
  MANALM 0
  MTRF   1.0
  FLOP   1
  FTIM   0.50
  XREFOP 0
  XREFIN 0.0
  KSCALE 1.0
  BSCALE 0.0
  BAO    1
  BAT    BAD INPUT
  BAP    5
  BAG    1
  ORAO   1
  ORAT   OUT OF RANGE
  ORAP   5
  ORAG   1
  HLOP   0
  ANM    MEASUREMENT
  HAL    350.0
  HAT    HIGH
  LAL    0.0
  LAT    LOW
  HLDB   0.0
  HLPR   5
  HLGP   1
  HHAOPT 0
  HHALIM 320.0
  HHATXT HI HI
  LLALIM 0.0
  LLATXT LO LO
  HHAPRI 5
  HHAGRP 1
  PROPT  0
  MEAS   0.0

>From: "Boulay, Russ" <russ.boulay@xxxxxxxxxxxxxxxx>
>Reply-To: foxboro@xxxxxxxxxxxxx
>To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
>Subject: Re: [foxboro] Ain FLOP
>Date: Thu, 12 May 2005 07:51:42 -0400
>
>I just tried it here in the TAC lab at the CSC works fine....
>
>Something else in the block....
>
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
>Behalf Of Dirk Pauwels
>Sent: Thursday, May 12, 2005 7:28 AM
>To: foxboro@xxxxxxxxxxxxx
>Subject: Re: [foxboro] Ain FLOP
>
>We have CP60, version 6.5.1 according to the station block. Tried
>checkpointing & exit, delete & undelete, delete & rebuild from scratch
>etc... the data is not filtered with iomopt at 1, rerouted to a new AIN
>block and IOMOPT = 2 it works. I don't get it?????
>
> >From: "Johnson, Alex (Foxboro)" <ajohnson@xxxxxxxxxxx>
> >Reply-To: foxboro@xxxxxxxxxxxxx
> >To: foxboro@xxxxxxxxxxxxx
> >Subject: Re: [foxboro] Ain FLOP
> >Date: Thu, 12 May 2005 07:21:12 -0400
> >
> >It is supposed to work. Contact the CSC.
> >
> >What version of the CP are you running by the way - Check the STATION 
>block
> >detail display.
> >
> >Regards,
> >
> >Alex Johnson
> >Invensys Process Systems
> >Invensys Systems, Inc.
> >10707 Haddington
> >Houston, TX 77043
> >713.722.2859 (voice)
> >713.722.2700 (switchboard)
> >713.932.0222 (fax)
> >ajohnson@xxxxxxxxxxx
> >
> >-----Original Message-----
> >From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] 
>On
> >Behalf Of Dirk Pauwels
> >Sent: Thursday, May 12, 2005 7:18 AM
> >To: foxboro@xxxxxxxxxxxxx
> >Subject: [foxboro] Ain FLOP
> >
> >In an AIN block, if I set FLOP = 1 and Dtime = 0.50 the data gathered 
>from
> >FBM channels (IOMOPT= 1) is not filtered, filtering does not work. If I
> >create an extra AIN block, IOMOPT = 2 and MEAS = first AINblock.PNT then
> >the
> >
> >filtering option works. I guess it's not possible to filter the data
> >directly or do I need to set another parameter?
> >
> >Thanks,
> >
> >Dirk Pauwels - DCS coordinator
> >Engineering dept.
> >Lawter International BVBA
> >An RSM Company
> >Ketenislaan 1c - Haven 1520
> >B-9130 Kallo, Belgium
> >T.  +32.(0)3.570.95.97/ Mob. +32.(0)497.428.300
> >F.  +32.(0)3.570.16.09
> >E mail: dirk.pauwels@xxxxxxxxxx
> >
> >_________________________________________________________________
> >
> >
> >
> >
> >_______________________________________________________________________
> >This mailing list is neither sponsored nor endorsed by Invensys Process
> >Systems (formerly The Foxboro Company). Use the info you obtain here at
> >your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> >
> >foxboro mailing list:             http://www.freelists.org/list/foxboro
> >to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> >to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> >
> >
> >
> >
> >_______________________________________________________________________
> >This mailing list is neither sponsored nor endorsed by Invensys Process
> >Systems (formerly The Foxboro Company). Use the info you obtain here at
> >your own risks. Read http://www.thecassandraproject.org/disclaimer.html
> >
> >foxboro mailing list:             http://www.freelists.org/list/foxboro
> >to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> >to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> >
>
>_________________________________________________________________
>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list:             http://www.freelists.org/list/foxboro
>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
>_______________________________________________________________________
>This mailing list is neither sponsored nor endorsed by Invensys Process
>Systems (formerly The Foxboro Company). Use the info you obtain here at
>your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
>foxboro mailing list:             http://www.freelists.org/list/foxboro
>to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>

_________________________________________________________________


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: